I received my 512Gb version of SD OLED today. As soon as I plugged my headphones, I noticed a constant static crackling noise in the background. It occurs regardless whether you are in a game or not. Is anyone facing the same issue?

I was using the same set of headphones with my LCD SD for a year now and never had this issue.

  • ThatLastGenGamer@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    I got my 512GB unit yesterday and immediately noticed the problem. The ground noise is unnacceptably high and varies between menus, in-game, according to the chosen power options, etc.

    I just ran a few comparative tests this morning using different headphones to see how bad it is:

    - Hyperx Cloud II: the ground noise is very noticeable at all times. It’s even more prevalent in the Steam Library than in-game but it never goes away.

    - Moondrop Quarks (IEM): the most noticeable of all, given the higher sensitivity. Unusable for anyone who cares even a little bit about clean audio.

    - Sennheiser HD 598SR: my oldest and most-used pair, usually slightly sensitive. The SD’s ground noise is a little less intense VS the previous two but still very noticeable and not acceptable. Once again, menus somehow show it the worst.

    - Sennheiser HD 560S: slightly less noticeable than with the 598. During gameplay in Prey (2017) I can almost forget about it, although it’s still there. Becomes noticeable yet again in menus.

    - Beyerdynamic DT-770 Pro 250ohm: the only pair which completely hides the issue for me. Not noticeable in-game or in menus. It’s a studio pair with higher impedance and lower sensitivity but it is not representative of a typical consumer-oriented product that most people will be using to play portably.

    I am somewhat hopeful that this issue can be mitigated through software. Maybe it’s a voltage control issue with the internal DAC or something of the sort. My LG G7 ThinQ smartphone had a dedicated Quad-DAC with purpose-built “audiophile” internals and it read some audio inputs completely wrong, creating lots of distortion with some headphones and none with others.

    I need to know if they plan to address the problem. I am not about to keep an almost 600€ portable device which can’t play well with portable headphones and IEMs.

    One final consideration is that I suspect they have the pre-amping on the internal DAC/ Amp way too high. The fact that my Beyerdynamic basically run perfectly and without any lack of volume points to the source gain being way too high for regular, sensitive headphones and IEMs. I really, really wouldn’t want to have to send this back.