I’m only bringing this up because I’d assumed, based on everything I’d read and videos I’s skimmed, that it would be the same process to swap SSDs on the new OLED Deck.
Boy was I mistaken. There’s a ribbon cable all the way across the system taped onto the shield which I had to carefully peel away mm by mm so that I could slip the shield off.
There’s also a thin wire taped to the side of the shield under that long taped on ribbon cable that needs to be separated as well.
I don’t remember anything as precarious feeling as that ribbon cable (I couldn’t tell what it was for but I didn’t want to mess anything up.
It was also 10x harder to wedge the shell open, maybe the tolerances are a bit better, but I was starting to freak out. I used the same blue wedges from the iFixit kit that worked easily on the LCD.
Anyways, a cautionary tale, expect differences inside.
I did mine pretty easy, I just disconnected the ribbon cable so i could tilt that cover upwards a little easier, popped the old one out and the new one in… (I did have to slightly move the shield upwards away from the screw so i could reach the screw with the screw driver. All in all it was slightly easier than the LCD version, Although I confess I forgot to unplug the battery on the LE… but everything works great and is back together now.