Find a reputable, professional board-level electronics repair specialist in your area. Probably won’t be free but they should have plenty of experience to help you safely fix up the pins. Afterward you should assume it will break if you do anything to mess with the connector going forward - Pins can only be messed with so much before they snap. Depending on the pins - I haven’t seen them in person - An electronics repair specialist might still be able to replace an entirely broken/missing pin though its not a situation you want to be finding yourself in to begin with.

Bending pins back into place isn’t automatically a major challenge. There’s actually a very easy way to do it if the pins aren’t too overly fragile. But given the connector you have trouble with is critical to system function and the cost of a full board replacement quite expensive… Its not a fix I’d recommend doing without experience (I do have some experience fixing pins and I still wouldn’t touch a battery connector).

Because you’re dealing with power do be careful messing around with the connectors. You could easily damage the connectors, pins, or board as a whole beyond economic repair. Also lithium batteries are prone to exploding and catching fire if they aren’t properly handled/wired.

Mint is effectively Ubuntu 22.04 LTS using desktops other than the awful Gnome Shell. Follow Ubuntu 22.04 LTS directions and you should be fine. I’ve been using the Mint Cinnamon option for the last 5 or 6 years, perhaps a bit longer. The ‘edge’ ISO may be a bit easier to get installed and running on Framework hardware as its using a newer kernel than ‘vanilla’ Ubuntu 22.04 LTS… The ‘edge’ packages are part of Ubuntu, merely not the default installed options in the almost 2 year old 22.04.

Mint differs from Ubuntu also in using (optional) flatpaks instead of (required, proprietary) snaps for packages outside the ordinary repos.

Whether you should even attempt switching depends on what you want to do, what apps you need/want to run. If you’re extremely interested in gaming or must run Adobe apps for example - Stay with Windows. If you’ve got a good bit of experience using different systems, mostly want to browse the web, read your e-mail, use LibreOffice in place of Redmond Office, learn how to do development - Linux might be a good choice. End of the day Linux isn’t for everyone. In my own case I’ve been working with Linux, UNIX, and vaguely similar systems since I was 6 years old (in the 1980s) - While dealing with these systems is second nature to me it may be a nightmarish challenge for you as someone steeped in Wintendo OSes.

1. Stick to DDR5-5600 SO-DIMMs. Issues are reported with anything else.
2. Choose standards (JEDEC) compliant modules. Most modules from reputable brands seem to be fine.
3. XMP (Intel) and Expo (AMD) are extra profiles on some modules, readable by BIOses supporting these features. As long as the ‘default’ profile is standards compliant, these should otherwise be OK. In some cases, especially with older DDR3/DDR4 modules the ‘default’ profile was minimum standard specs (eg equivalent to DDR5-4800 - Not good for Framework).
4. Crucial, G. Skill, and Kingston are among the ‘name brand’ OEMs offering DDR5-5600 SO-DIMMs known to work with FW 13 AMD (probably also FW16, can’t be sure til those of us with pending FW16 orders have hardware to test). If you’re concerned go Crucial - They are a Micron-owned company, one of the top 3 DRAM manufacturers in the world. Micron/Crucial explicitly markets their modules as standards compliant.

There’s not much reason to buy Framwork-branded RAM unless you absolutely must have Framework guaranteed compatibility, Framework support, and a Framework warranty on the modules. Going 3rd party from a top tier vendor - As above - Will cost far less for parts which ultimately perform just as well. The primary tricks are to not buy anything other than DDR5-5600 rated modules (for AMD) and to not buy from random junk vendors on a ‘sort by price’ basis.

No Chromebook using 13th gen Intel or AMD has been announced as far as I’m aware. The listing I see on Framework’s site is for the older 12th gen Intel-based version - Effectively a 12th gen FW13 with ChromeOS installed.

With most Chromebooks being built around junk PC hardware costing under $600 Framework’s $1000 option was an outlier. I do wonder what demand/sales were like, whether interest high enough to justify an updated version. Suppose we’ll find out if/when a new model is announced.

Chromebooks, the forced demands to buy them over other options, are among the reasons I’m happy to not have kids (let alone in public schools).

When you do pay for a Chromebook be sure to check where it is in Google’s support lifecycle. There’s apparently been issues with hardware either already at or very near EOL still being sold for hundreds of dollars.

Mint is effectively Ubuntu 22.04 LTS. Treat it as such and it should be fine. The main differences are Cinnamon, Mate, or Xfce instead of the horrid Gnome and flatpak instead of snaps. I’d expect the Framework directions to get 22.04 LTS working to also work on Mint.

Mint does have an ‘edge’ iso, using Ubuntu’s newer ‘-edge’ packages from 22.04 LTS.

Ensuring you have the latest Framework BIOS is also helpful - Its known to have solved some people’s issues.

Beyond Fedora 39, other distros are not “officially” supported by Framework in part because there’s countless many of them, partly because some of them are either ‘rolling releases’ or quite short term (Ubuntu non-LTS releases are EOL after 9 months). The “long list of instructions” Framework offers for Ubuntu 22.04 LTS is for this reason - Its stable, reliable, and well supported overall but also nearly 2 years old so lacking in support for 2023 hardware. As a workaround you could try Ubuntu 23.10, upgrading that to 24.04 LTS next April - It would be based off packages mostly from spring/summer 2023.

I don’t have a FW13 AMD, but do have FW16+dGPU on order. It will be running Mint Cinnamon Edition. Not especially concerned about issues… I have no problem building my own kernels if need be (I already do that anyway to use current stable releases - 6.6.1 currently) and do use certain PPAs (kisak-fresh and Rob Savoury’s archives - I do kick a few bucks his way for private repo access) to bring Mint 21.2 much more current than stock Ubuntu 22.04 LTS.

AMD works perfectly fine on Linux. I’ve been using both Intel and AMD on Linux (alternating depending on which has the better options at any given time) since the original Athlon processors came out more than 20 years ago. I have 2 AMD machines, running Linux, in front of (and beside) me as I type - And another with WintendoOS 10 (only Wintendo I own).

Unless you need a laptop within about a week or can name/explain a specific Intel-only feature you explicitly require, go with AMD. Why? Better performance, better battery life, better integrated graphics, and no e/p cores to cause headaches with virtualization. Intel’s e/p core big.LITTLE split causes headaches with virtualization due to a bunch of the cores (efficiency cores) not having the same features/performance as the others (performance cores).

Framework has indicated in a blog a few weeks ago they expect to be caught up with AMD FW13 pre-orders by the end of the year. Based on subreddit posts they’re up to starting batch 7 processing, making it appear they will likely reach the “in stock” estimate.

If you do go with Framework, save yourself a bunch of money going with the DIY option. You can get RAM and SSDs much cheaper pretty much anywhere. The power supply can also be sourced elsewhere - Choose a USB C charger of at least 60w, ideally using modern GaN technology, from a reputable vendor such as Anker, Ugreen (among others)… Don’t go with a brand nobody’s ever heard of with a name that looks like it was created firing darts at a dart board (eg: don’t do a ‘sort by lowest price’, ordering the cheapest option).

Are you on Final Cut Pro or Adobe Premiere Pro? If you’re on Final Cut stay with Apple and go with a new MacBook Pro. You already know how to use it, you know it will do the work you need it to do, and you know you can get one from Apple - Even a horrifically overpriced custom config - In short order. In the US (not legal advice, blah blah blah) at least, you might also be able to expense a new MacBook Pro for tax purposes. Although I don’t personally like a lot of Apple’s anti-consumer practices, bad engineering, and terrible pricing they do have one thing going for them - Battery life for Apple Silicon MacBooks is second to none. It can’t be beat, if that matters to you.

My own order is FW16 Batch 5. Although I will use it for professional dev and sysadmin purposes on Linux FW16 won’t be my primary machine… I have desktops for that.

Point #5 is most important to me. My FW16 will never run as a Wintendo. Having gone with the dGPU option (not a cheap option) I expect it to work properly with Linux from the start… Especially considering Framework doesn’t allow dropping the dGPU option without canceling the entire order and going to the back of the line with a new order.

Take the extra time, get FW16 working well on both major OSes from day 1 (absent a list of minor known issues which can definitively be fixed with a firmware update released quickly after launch). If the first 4 batches have a bunch of Linux issues for which I can’t envision obvious workarounds - Recognizing I have 25+ years of Linux desktop/laptop experience to go on - My batch 5 order will be cancelled and I’ll wait for “gen 2” next year.

As much as I hate my System76 Oryx Pro (explained elsewhere in r/framework) it does (mostly) work a few weeks past 3 years old. I’m not desperate enough for a new laptop to accept (another) machine with problems out of the box.

If I wanted another problem laptop I’d have gone with a 2023 Oryx Pro or a Dell XPS 17. Instead I opted for FW16 expecting it to be done properly rather than in a hurry and on the cheap.

All in all I’m looking forward to FW16 once its fully ready. FW16 ticks the items I explicitly wanted in replacing the Oryx Pro - 16-17" screen with 16:10 aspect (not 16:9), numeric keypad eliminated (or optional) in favor of a centered keyboard, fully AMD - No Intel or Nvidia CPU/GPU (dGPU was optional on my requirements list), and socketed RAM/SSDs. As far as I’m aware FW16 is the only option available ticking all of those items… Especially the numpad/offset keyboard I’ve come to find incredibly annoying… Ditching the numpad is one of the few things Apple has gotten right since the m68k PowerBook era.

Anyone who cares that much about gaming should be using a wire with a USB connector on the end opposite their rodent. 2.4Ghz vs 2.4Ghz is still 2.4Ghz RF.

Bluetooth is 2.4Ghz, same as proprietary dongles. I’ve been using Bluetooth mice for most of the last 20 years in a very RF noisy environment… Apple’s mice did need frequent battery replacement. Others from Microsoft and Logitech, eg Logitech’s M720? Once or twice a year they get a new AA despite being used all day every day. Disconnecting? Not a problem.

AMD and don’t think twice about it. Better power management, better performance, better iGPU. If you go FW16 AMD is the only option.

Only reasons to go Intel? You can name and explain a specific feature AMD lacks and which is essential for your work. Alternatively, you require “in stock” shipment - Delivery in around a week or so. AMD FW13 won’t be “in stock” for awhile longer - Framework wrote in a blog a few weeks ago they’re thinking that will happen towards the end of the year. FW16 is back ordered - Based on the shipping estimates of “Q2” - Until sometime next spring.

USB C is much more complicated than a physical port. Sure its a single connector type. Sure its small. But its also got a lot of supported functionality which in turn requires a lot of supporting engineering and circuitry to support.

I have a FW16 on order. Its got 6 expansion slots. I’m struggling to figure out how to - Regularly - Use more than 2 or 3. A dual port USB C module would add no value, only complexity and probably cost more than a standard single port module.

What I’d like to know is how many people regularly fill every port of their 6, 8, 10, 12 port laptops as-is? Of those, and with so many connections, how many would be better served using a dock or moving up to a desktop/workstation?

Since video is also using RAM lower latency CL40 is a good way to go. As to amount - The best way, especially if you’re already doing some of this work, is to look at your current system usage while you’re working. If you see you’re only using 15 or 20GB currently - 32GB is going to do you well for a long time (absent a major change in your workload). If you notice you’re already using 25 or 30GB - Probably worth going to 64GB. Take note of how much swap is in use also, not RAM alone.

In my case I do dev under Linux/IntelliJ and have seen my actual usage, with some VMware Workstation VMs also going, hit ~40GB. On some occasions it can go much higher running certain internal data processing tools. I’ll be going with at least 64GB on FW16, 96GB if I feel like spending the extra money closer to shipping.

Take a look at Framework AMD (not Intel) options. Battery life is pretty good. Bonus - Its easy to upgrade when new processors are released, you need more RAM, or need more storage. Just as easy to replace anything that wears out - All the parts are available on Framework Marketplace with install directions and videos… Working with a Framework requires no more than a T5 torx driver and a spludger, included in the box with every laptop.

I also do dev work - Mostly network management and other internal tooling… C/C++, NodeJS, PHP, etc. At the moment I have a Framework 16 on order. As a Linux user I wanted hardware with solid Linux support… Dell’s hardware hasn’t been all that great, Lenovo’s pricing is a mess to figure out. System76’s rebranded Clevo laptops are overpriced junk (I currently have an Oryx Pro oryp6, unfortunately). Beware if you want to do any virtualization AMD is the better way to go - Intel’s E/P cores cause trouble… Not to mention Intel processors run hot and are less than power efficient nowadays.

AMD. No contest. The only reason to buy Intel is being able to name and explain a specific feature AMD doesn’t offer, or needing delivery in about a week (without watching in the AMD batch queue). AMD is better performing, better power management, and better integrated graphics.

Solidigm P44 Pro or P41 Platinum would be my choices. I wouldn’t go with the P41 Plus - QLC NANDs and no DRAM caching. SK Hynix/Solidigm stuff is known for being very power efficient, Samsung 980/990 Pros are more power hungry and probably (don’t remember, didn’t look it up) hotter.

If you can’t find the $700 quality laptop already on the market that you want… Maybe you should start a company to offer it? See how profitable the business is (or realistically, isn’t).

There’s very good reasons $700 laptops are mostly e-waste straight off the assembly line, old models, etc. There’s no profit to be made offering current generation mid-range/higher quality laptops for $700 without doing serious corner cutting at every opportunity.

Its called competition. Supply and demand. As son as there’s another Framework-like company or two, the companies will need to find new ways to differentiate themselves - One possibility would be on pricing.

G.Skill is also a good option. Has CL40 available, costs a lot less than Crucial.

Sounds like Framework isn’t the right choice for you. I’d recommend you go buy the $700 option… Save the $500 difference so you’ve got money in the bank to buy its replacement when parts that should be repairable/replaceable - Aren’t.

If you’re able to find anything similar to Framework for $700, good build quality - Do let us know what that is… I’m sure everyone here would be happy to save some money.

As a Linux user, I’d mostly be fine with an ARM laptop. Except for running VMware Workstation and Windows. I don’t really seem Qualcomm being able to match Apple in terms of a smooth migration from x86 let alone the problems with Windows, drivers, and decades of random apps.

ARM laptops/desktops in the PC space will happen. Replace x86? Not anytime soon. Need a machine today? Buy AMD and don’t think twice about it.