So, 250/300 w during full load. 100 degrees is reached in some seconds, idle temp is 25.

Cpu pushes to the tj max and downlock to reach 98 degrees. Then pushes again towards 100 degrees.

It’s the spec. But i want to know: if i launch a rendering 24 hours a day for weeks, can it sustain this load at 100 degrees without any damage?

Thanks

  • Cradenz@alien.topBEnglish
    1·
    10 months ago

    my motherboard has has unlimited power limits for the pl2 but the pl1 is at 253. so for 96 seconds it will be at 100c but after that boost period is done it will go to 253w and stay at 80c. this is a good compromise if you want short/burty performance but long rendering it will stay at 253w after the boost period is over