Hey.

Just upgraded my cooler from noctua redux to deepcool ls720 SE AIO for my 13600k and installed thermal right contact frame. But the temperature in cinebench still somehow hitting 100°C.

I haven’t touched anything in bios except xmp.

Room temperature 32°C

Idle temps went from 45°C to 38°C

Gaming temps (mainly cs2) went from around 70-85°C to 55-70°C

Back with the air cooler I was getting lower and lower Score each run of cinebench but now the lower I get even after several runs never below 23k mark and the first run score got boosted by around 1000 point even though the CPU is hitting 100°C.

Here is a screenshot with the current temps am getting in the middle of running cinebench.

System specs:

Rtx 2070 super 13600k 2x8 ddr4 3600mhz Asus tuf b760m gaming plus d4

Running the AIO front mount with fans as intake and 3 top fans as exhaust and 1 back fan as exhaust.

So are those behavior normal during gaming and cinebench?

  • shoda_@alien.topBEnglish
    1·
    11 months ago

    So NR200P Max here with 13600k & b760-i bios 1205

    The microcode settings is under F7 Advanced Mode -> TAB: AI Tweaker -> select Tweakers Paradies -> Switch Microcode

    There you can select 0x104 Microcode

    What i also changed is under AI Tweaker the following two selections:

    Global Core SVID Voltage from Auto to Offset Mode

    • ⁠Offset Mode Sign: -

    • ⁠Offset Voltage: 0.15000

    Cache SVID Voltage from Auto to Offset Mode

    • ⁠Offset Mode Sign: -

    • ⁠Offset Voltage: 0.15000

    Cinebench 24100 pts ~ 152 Watt ~ 82 (few cores hit the max Temp of 89/90)

    Hope i could help you guys out