Hello Peeps, since retiring due to being diagnosed with chronic illnesses I am not up to date with the latest and greatest. So I need some help please?
I just purchased a Intel 13600K and a MSi S1700 ATX MAG Z790 Tomahawk WiFi DDR4 motherboard and I am wondering if I need to add washers or a contact plate so the IHS isn’t bent or causes heat issues?
I have read conflicting stories on the subject. But thought it best to ask experienced and pro builders about this. Like I said since retiring all this latest and greatest technology eludes me 😳.
So any help will be greatly appreciated and thank you on advanced!
As the chip heats and cools over lifetime it will expand and contract slightly. The Intel sockets are characteristically more rectangular and the point of contact from the default bracket extends across the longer sides. This has been a thing since LGA1200 with the amount of volts and level of turbo boosting to compete with competition. The benefit of LGA1700 is that there are 4 through holes for the CPU retention bracket, versus only 3 on LGA1200. With a third party ILM bracket you can more evenly distribute the pressure and lessen the bowing over time.
I would also recommend lowering the max clock below what the chip is designed for. CPUs have come a long way. My Asus board lets me create profiles, so i have one preset with turbo disabled and one with a -1GHz debuff. Max temps under water are 42/56 respectively, after my last LGA1200 died after 18 months never exceeding 75*C. If not going water, look into good air cooling reviews. I’m a huge fan of Noctua for a balance of performance and acoustics.