Hey.

Just upgraded my cooler from noctua redux to deepcool ls720 SE AIO for my 13600k and installed thermal right contact frame. But the temperature in cinebench still somehow hitting 100°C.

I haven’t touched anything in bios except xmp.

Room temperature 32°C

Idle temps went from 45°C to 38°C

Gaming temps (mainly cs2) went from around 70-85°C to 55-70°C

Back with the air cooler I was getting lower and lower Score each run of cinebench but now the lower I get even after several runs never below 23k mark and the first run score got boosted by around 1000 point even though the CPU is hitting 100°C.

Here is a screenshot with the current temps am getting in the middle of running cinebench.

System specs:

Rtx 2070 super 13600k 2x8 ddr4 3600mhz Asus tuf b760m gaming plus d4

Running the AIO front mount with fans as intake and 3 top fans as exhaust and 1 back fan as exhaust.

So are those behavior normal during gaming and cinebench?

  • rulik006@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    217W package power means that your cpu is overvolted by motherboard
    Normal power usage for stock 5.1ghz 13600k in CB23 is 150-160w

    looking like this is MSi board

    • Mishakkk1337@alien.topOPB
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      It’s an Asus tuf b760m. So what do you suggest force power limits to default tdp or undervolt or both ?

      • rulik006@alien.topB
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        you should show what core voltage under load in Hwinfo64 or aida64
        and 10sec of AIDA FPU to show power usage

      • No_Guarantee7841@alien.topB
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Cant undervolt (much) in b series boards since it leads to performance degradation due to IA CEP. You need a z series board for that. Best you can do is lower pl1,pl2 to ~181w. Could try a bit less and see where performance starts to drop.

      • shoda_@alien.topB
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        So NR200P Max here with 13600k & b760-i bios 1205

        The microcode settings is under F7 Advanced Mode -> TAB: AI Tweaker -> select Tweakers Paradies -> Switch Microcode

        There you can select 0x104 Microcode

        What i also changed is under AI Tweaker the following two selections:

        Global Core SVID Voltage from Auto to Offset Mode

        • ⁠Offset Mode Sign: -

        • ⁠Offset Voltage: 0.15000

        Cache SVID Voltage from Auto to Offset Mode

        • ⁠Offset Mode Sign: -

        • ⁠Offset Voltage: 0.15000

        Cinebench 24100 pts ~ 152 Watt ~ 82 (few cores hit the max Temp of 89/90)

        Hope i could help you guys out