I’ve tried a couple sleeves/cases, some thumb caps, the stick on pads for L/R 4/5, and I always end up removing them because I actually prefer the feel of the plain Steam Deck. Anyone else have this happen where whatever they slide or stick onto their Deck makes it feel “wrong”?

  • TheDarkHorse@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    Just a screen protector. I’ve never liked grips/cases/accessories unless they were necessary. Things like lights and such.

  • pizzalover89@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    All you need is some thumb-stick covers, a case with a stand attachment and a screen protector

  • Gnarwhal30@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    I do, but I am feeling the need for thumb caps when playing soulstone survivors haha

  • rye_etc@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    I feel I can hold it better in my hands with the jsaux case. Other than that I haven’t tried any accessories. Except a screen protector of course

    • eternaeta@alien.topB
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      I have the same case. Love how it makes it easier to hold and the kickstand is so handy.

  • eacb93@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    I just have a screen protector on mine. I had a case but it made it feel to bulky and it was hard to press the r1 and l1 buttons

    • NotADamsel@alien.topB
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      I drop shit, due to disability. All of my hand-held electronics get a case. I know that I’m not the only one. Unnecessary “tat”, you say? All of the accessories? Really? Please, tell us why this is unnecessary. Go on. Explain it.

  • Viewtiful-Scotland@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    Screen protector is the only thing I put on my Steamdeck because I know I’d be gutted if I got any scratches no matter how tiny or insignificant. Other than that yeah I just keep it bare. Most cases are fugly anyway

    • himynameiswillf@alien.topB
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      I managed to get a tiny scratch right in the middle of my LCD Deck by being too lazy to grab a cloth and wiping the Deck’s screen with a plush seal lol.

      It’s a small scratch, but once you notice it, it’s hard to ignore. A screen protector went on my OLED day 1.

        • himynameiswillf@alien.topB
          link
          fedilink
          English
          arrow-up
          1
          ·
          10 months ago

          I find it’s necessary to run a hot shower for a few minutes, get the bathroom steamy, and apply it there. I’ve applied two screen protectors in my life that way and both times they’ve worked near flawlessly.

          Every time I do it without the help of steam, it’s a bubble fest.

          • ChucknChafveve@alien.topB
            link
            fedilink
            English
            arrow-up
            1
            ·
            10 months ago

            A small spray bottle with distilled water can also be used, a light misting of the screen and then a CC or plastic scraper and the water will push the air bubbles out. Less is more when it comes to spraying your screen with anything.

            I like the hot shower solution too.

          • Jonnicom@alien.topB
            link
            fedilink
            English
            arrow-up
            1
            ·
            10 months ago

            This is a good way to do it, it makes sure you don’t get lots of dust floating in the air.

            • mmm1808@alien.topB
              link
              fedilink
              English
              arrow-up
              1
              ·
              10 months ago

              Distilled water is safer on most screens and it won’t harm anything. IPA can damage some screen coatings.

        • Iyajenkei@alien.topB
          link
          fedilink
          English
          arrow-up
          1
          ·
          10 months ago

          Spray it with alcohol apply the screen protector then squeegee it with something flat

      • BatSphincter@alien.topB
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        If the scratch isn’t too deep a screen protector may actually make it to where you can’t see it.

        • himynameiswillf@alien.topB
          link
          fedilink
          English
          arrow-up
          1
          ·
          10 months ago

          Yeah I’ve had that “solve” scratches before but in this case it looked exactly the same unfortunately.

      • Arcanegil@alien.topB
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        Not to be a bother, but I ordered the OLED, as my first deck, I know the screen is bigger than the original deck, but from my understanding it’s a shorter bezel, does a regular lcd deck screen protector fit on the OLED ?

        • himynameiswillf@alien.topB
          link
          fedilink
          English
          arrow-up
          1
          ·
          10 months ago

          It’s the same footprint, only the bezel had shrunk to make way for more screen, so any screen protector built for the LCD Deck should fit the OLED. The JSAUX ones I bought make no reference to the OLED but fits the entire screen, bezel to bezel.

    • DynamicHunter@alien.topB
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      Same here. Got a screen protector asap for my switch cause the OG dock would scratch the screen. Have a matte screen protector on my deck and it helps with glare

  • JM761@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    Yup. I use mine completely factory default. I despise covers and grips or joystick grips. Kills the look and makes it too bulky IMO.

  • CoffeeCapy@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    The only accessory I have on my Deck is thumb grips for the sticks. They feel way too slippery for me. I tried playing DS3 and my thumbs kept slipping off for some reason.

    If you’re really rough with your deck or have a child playing with it, getting a case and screen protector isn’t such a bad idea though.

  • Taeles@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    15 years ago I would of been fine with a Deck sticking out of my oversized pants pocket, whipped out here and there to get quick gaming on its tiny screen. But my eyes are starting to slip and my monitors have gotten bigger and bigger over time. My favorite accessory to date has been my xreal air pro AR glasses. 200 inch screen in front of my eyeballs, deck in my hands. epic.